PASS JN0-663 exam with Juniper Real Exam Questions - 100% Valid!
Actual JN0-663 Exam Recently Updated Questions with Free Demo
How much Service Provider Routing and Switching, Professional JN0-663 Exam Cost
The price of the JN0-663 exam is $200 USD. for more information related to the Service Provider Routing and Switching, Professional JN0-663 exam, please visit Juniper Website, as the prices changes based on different currencies.
NEW QUESTION # 42
Exhibit:
Which three statements are true about the show pim join output shown in the exhibit? (Choose three.)
- A. The multicast stream does not have an RP.
- B. The shortest path to the source is through the RP.
- C. The multicast stream has been configured with a backup path to allow for fast reroute.
- D. This is a source-specific multicast stream.
- E. The multicast receiver is still using the RP to receive the stream.
Answer: B,C,E
NEW QUESTION # 43
Exhibit:
The route shown in the exhibit is an example of which type of next-generation MVPN route?
- A. Type 3 Selective MVPN autodiscovery route
- B. Type 1 Intra-AS inclusive MVPN membership discovery
- C. Type 4 Selective MVPN autodiscovery route for leaf
- D. Type 2 Inter-AS inclusive MVPN membership discovery
Answer: B
NEW QUESTION # 44
Exhibit:
Your network connects two segments of your customer's network as shown in the exhibit They need to exchange routes between Segment 1 and Segment 2 but both segments use the same AS number.
Which two steps will accomplish this task? (Choose two.)
- A. Configure the BGP group with the as-override parameter on routers R1 and R4.
- B. Configure the BGP group with the advertise-peer-as parameter on routers R2 and R3.
- C. Configure the routing-options autonomous-system loops l parameter on routers R1 and R4.
- D. Configure the routing-options autonomous-system loops l parameter on routers R2 and R3.
Answer: B,C
NEW QUESTION # 45
Exhibit:
Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)
- A. Configure the family inet unicast statement on the local BGP router.
- B. Configure the family inet unicast statement on the BGP neighbor
- C. Configure the family inet-vpn unicast statement on the local BGP router.
- D. Configure the family inet-vpn unicast statement on the BGP neighbor.
Answer: C,D
NEW QUESTION # 46
Exhibit:
Referring to the exhibit, you are asked to summarize all routes in the 10.10.0 0/22 address range ensuring that a single summary route is present in area 49.0002 while the IS-IS internal contributing routes are restricted to area 49.0001. All other routes must not be affected.
Which two operations would have to be performed on R2 to accomplish this task? (Choose two.)
- A. Include the to level 2 match criteria when referencing the summary route.
- B. Create and apply a policy with two terms; one to accept the summary route and one to reject the contributing routes.
- C. Include the from level 1 match criteria when referencing the summary route.
- D. Create and apply a policy with a single term to accept only the summary route.
Answer: A,B
NEW QUESTION # 47
The link between CE1 and PE1 has a history of flapping To avoid the impact that flapping causes to the network you decide to use route damping Which statement is correct in this scenario?
- A. Dampened routes decay at a sliding rate known as half-life
- B. Routes become dampened when the configured max-suppress value is reached
- C. Dampening is enabled on interfaces
- D. Dampened routes become active when their figure of merit drops below the reuse value.
Answer: A
NEW QUESTION # 48 
Referring to the exhibit, which three statements about route 10.222/16 are correct when using the default BGP advertisement rules? (Choose three)
- A. R2 will prepend AS10 when advertising 10.222/16 to R7.
- B. R1 will prepend AS10 when advertising 10.222/16 to R2.
- C. R2 will advertise 10.222/16 to R4 with itself as the next hop.
- D. R7 will advertise 10.222/16 to R9 with itself as the next hop.
- E. R1 will advertise 10.222/16 to R2 with itself as the next hop.
Answer: A,C,D
NEW QUESTION # 49
Click the Exhibit button.
A network administrator is investigating why traffic from R2 is not being forwarded to R1 Referring to the show isis database command output shown in the exhibit, what is causing this problem on the network?
- A. R1 is configured to drop all incoming traffic.
- B. R2 is ignoring specific LSPs from R1 in its SPF calculations.
- C. R1 and R2 are in different IS-IS areas.
- D. The preferred interface between R1 and R2 is experiencing errors
Answer: B
NEW QUESTION # 50
You are considering different MPLS VPN connectivity options for a new customer deployment. Your customer requires shared LSPs, Layer 2 connectivity, and auto-provisioning.
Which type of VPN satisfies the requirements?
- A. circuit cross-connects
- B. LDP Layer 2 circuits
- C. BGP Layer 2 VPNs
- D. BGP Layer 3 VPNs
Answer: C
NEW QUESTION # 51
Exhibit:
You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.
In this scenario, which configuration changes must be made to satisfy the requirement?
- A. Configure the import parameter and apply the policy to the my-ext-group BGP group configuration.
- B. Configure the export parameter and apply the policy to the my-ext-group BGP group configuration.
- C. Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp I3vpn.0 routing table
- D. Configure the vrf-export parameter and apply the policy under the edit routing-instances vpn-a hierarchy.
Answer: D
NEW QUESTION # 52
Exhibit:
Referring to the exhibit, you want to reduce the CPU processing load on PE 2 by preventing the receipt of routes belonging to Customer B.
In this scenario, which Layer 3 VPN scaling mechanism provides this functionality?
- A. route target filtering
- B. route refresh
- C. route reflection
- D. route origin
Answer: A
NEW QUESTION # 53
Exhibit:
Referring to the ABR configuration shown in the exhibit, which three statements are correct? (Choose three.)
- A. The ABR advertises a default route to the NSSA using a Type 7 LSA.
- B. The ABR does not summarize any routes within the 192.168.16.0/20 range.
- C. The ABR advertises a single Type 3 summary LSA to the backbone area for all Type 1 and Type 2 LSAs in the 192.168.16 0/20 range.
- D. The ABR advertises a single Type 5 external LSA to the backbone area for all Type 7 LSAs in the NSSA.
- E. The ABR advertises a Type 5 external LSA to the backbone area for each Type 7 LSA in the NSSA.
Answer: A,C,E
NEW QUESTION # 54
Exhibit:
Which two statements regarding the output shown in the exhibit are correct? (Choose two.)
- A. The label associated with this virtual circuit is out of range.
- B. The type of connection is local.
- C. The type of connection is remote.
- D. The PEs have matching control word values.
Answer: C,D
NEW QUESTION # 55
Which statement is correct about BGP FlowSpec between a service provider's PE router and a customer?
- A. The flow routes received from a customer are limited to /32 masks for IPv4.
- B. The NLRI received from a customer is stored in the inetfiow.0 table
- C. The NLRI received from a customer is stored in the flowspec. inet .0 table.
- D. The RFC deterministic traffic filtering algorithm is used by default in Junos.
Answer: B
NEW QUESTION # 56
Exhibit:
Traffic is being sent from R2 to R3. The link between R2 and R3 fails.
Referring to the exhibit, which statement is correct?
- A. Traffic will automatically reroute distributed between all available paths.
- B. Traffic will automatically reroute using the shortest path, which is R2 to R1 to R3.
- C. Manual intervention is required for traffic to be rerouted.
- D. Traffic will automatically reroute using R2 to R4 to R1 to R3.
Answer: D
NEW QUESTION # 57 
Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.
Winch two EVPN functions accomplish this task? (Choose two.)
- A. designated forwarder election
- B. multicast ingress replication
- C. split horizon
- D. aliasing
Answer: A,C
NEW QUESTION # 58
Exhibit:
All adjacencies have been formed, no extra options have been configured, and no policies have been written.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. R1 cannot reach R5
- B. R1 will create its own default route that points to R2
- C. R1 can reach R5.
- D. R2 will create a default route and send it as a TLV to R1
Answer: C,D
NEW QUESTION # 59
Click the Exhibit button.
A network administrator is investigating why traffic from R2 is not being forwarded to R1 Referring to the show isis database command output shown in the exhibit, what is causing this problem on the network?
- A. R1 is configured to drop all incoming traffic.
- B. R2 is ignoring specific LSPs from R1 in its SPF calculations.
- C. R1 and R2 are in different IS-IS areas.
- D. The preferred interface between R1 and R2 is experiencing errors
Answer: B
NEW QUESTION # 60
Exhibit.
R2 is receiving a route from an EBGP neighbor and is advertising the route to R4 Referring to the exhibit, which configuration on R2 will solve the issue with the route on R4?
- A. Move the no-advertise export policy from group 65002 to a global BGP policy.
- B. Move the no-advertise export policy from group 65001 to a global BGP policy.
- C. Move the ahs policy from a global BGP export policy to an export policy under group 65002
- D. Move the no-export policy from a global BGP import policy to an import policy under group 65001.
Answer: C
NEW QUESTION # 61
You want to allow the load balancing of traffic for an EBGP route from two different peers in the same AS.
Which three actions are needed to accomplish this task? (Choose three.)
- A. An equal cost AS path for the route is required.
- B. The multipath parameter should be configured under protocols BGP
- C. At least two interfaces should be connected to the same EBGP neighbor
- D. The multihop parameter should be configured under protocols BGP
- E. A policy to load-balance traffic should be applied to the forwarding table
Answer: B,C,E
NEW QUESTION # 62
Which two statements about virtual links are correct? (Choose two.)
- A. Virtual links are used for control plane traffic.
- B. Virtual links are point-to-point.
- C. Virtual links are excluded from SPF calculations.
- D. Virtual links are bidirectional.
Answer: A,B
NEW QUESTION # 63
Exhibit:
Traffic is being sent from R2 to R3. The link between R2 and R3 fails.
Referring to the exhibit, which statement is correct?
- A. Traffic will automatically reroute distributed between all available paths.
- B. Traffic will automatically reroute using the shortest path, which is R2 to R1 to R3.
- C. Manual intervention is required for traffic to be rerouted.
- D. Traffic will automatically reroute using R2 to R4 to R1 to R3.
Answer: D
NEW QUESTION # 64 
You are provisioning Layer 2 circuits between sites CE1, CE2, and CE3.
Referring to the exhibit, which statement is true?
- A. Each site must have only one VLAN configured to the PE.
- B. Site PE1 must have a point-to-multipoint link configured towards the core.
- C. A point-to-multipoint LSP must be created between sites.
- D. Two VLANs must be configured from PE 1 to CE 1.
Answer: D
NEW QUESTION # 65
Exhibit:
You have the Layer 2 VPN configuration shown in the exhibit. You are asked to determine the remote site ID for ge-1/0/1.512.
In this scenario, what is the remote site ID?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 66
Exhibit:
All networks shown in the exhibit contain more than one BGP speaker You operate ISP A and must ensure that Customer Y sends their traffic to you over the directly connected link. Customer Y is not to be used for transit into your network.
What would you do to accomplish this task?
- A. Advertise routes to Customer X with the custom defined 0:0 community
- B. Advertise routes to Customer X with the well-known no-advertise community.
- C. Advertise routes to Customer Y with the custom defined 65535:65535 community.
- D. Advertise routes to Customer Y with the well-known no-export community
Answer: D
NEW QUESTION # 67
......
The JN0-663 exam covers a wide range of topics including OSPF, IS-IS, BGP, MPLS, Layer 2 and Layer 3 VPNs, and multicast. Candidates are expected to have a solid understanding of these technologies and be able to configure and troubleshoot them in a service provider network environment. Additionally, candidates must be familiar with Juniper Networks hardware platforms and software architectures.
JN0-663 Free Sample Questions to Practice One Year Update: https://examtorrent.actualcollection.com/JN0-663-exam-questions.html