NS0-183 PDF Exam Material 2022 Realistic NS0-183 Dumps Questions
Updated Network Appliance NS0-183 Dumps – PDF & Online Engine
Network Appliance NS0-183 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NetApp NS0-183 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Code | NS0-183 NCSIE |
| Passing Score | 67% |
| Duration | 90 minutes |
NEW QUESTION 18
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. fabricshow
- B. show running-config
- C. switchcfgshow
- D. config show
Answer: C
NEW QUESTION 19
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. command history
- B. SNMP traps
- C. EMS messages
- D. AutoSupport messages
Answer: A,D
Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf
NEW QUESTION 20
One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)
- A. Use Secure Shell.
- B. Use Telnet.
- C. Use the Service Processor Interface.
- D. Use the Intelligent Platform Management Interface.
Answer: A,C
NEW QUESTION 21
A customer wants to expand a 10-node AFF A700s NAS cluster running with Cisco Nexus 3132Q-V cluster interconnect switches using new nodes.
In this scenario, what is the maximum number of nodes to be added into this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 22
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation/Reference: https://www.storagefreak.net/2017/08/netapp-cdot-ontap-9-rdb-and-cluster-replication-ring
NEW QUESTION 23
You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.
Which statement explains this behavior?
- A. You do not have network discovery enabled.
- B. You do not have a static IP address.
- C. You do not have a default gateway set.
- D. You do not have IPv6 configuration set.
Answer: A
Explanation:
https://docs.netapp.com/platstor/index.jsp?topic=%2Fcom.netapp.doc.hw-a800-install-setup%2FGUID-91C7E4FC-5B24-414C-ABF3-F2AAD1E465B1.html network discovery is not enabled on your laptop
NEW QUESTION 24
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 25
What are two types of load balancing methods available in multimode interface groups? (Choose two.)
- A. LIF-based load balancing
- B. broadcast domain-based load balancing
- C. IP-based load balancing
- D. port-based load balancing
Answer: C,D
NEW QUESTION 26
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. Active IQ Unified Manager output
- B. Active IQ OneCollect output
- C. Config Advisor output
- D. NetAppDocs output
Answer: C
NEW QUESTION 27
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)
- A. EMS
- B. AutoSupport
- C. banner
- D. motd
Answer: B,C
NEW QUESTION 28
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A. storage failover takeover -of-node NetApp-Cluster-02
- B. system node run -node NetApp-Cluster-02 -command cf giveback
- C. storage failover giveback -of-node NetApp-Cluster-02
- D. system node run -node NetApp-Cluster-02 -command cf takeover
Answer: A,C
NEW QUESTION 29
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?
- A. NetAppDocs
- B. Active IQ OneCollect
- C. SnapGathers
- D. Inventory Collect Tool
Answer: A
Explanation:
Explanation/Reference: http://197.253.9.244/ontap%209-5/Cluster%20Admin/2_Student%20Guide/STRSW-ILT- ONTAPADM_StudentGuide.pdf
NEW QUESTION 30
While installing a new AFF A400 HA pair, you are unable to add an NTP server from another subnet. You are able to ping the NTP server from the new cluster.
In this scenario, what are two causes of this problem? (Choose two.)
- A. A firewall is blocking port 123.
- B. The admin SVM has the wrong gateway.
- C. The time skew is too great.
- D. The cluster management LIF needs to be in a different IPspace.
Answer: B,D
NEW QUESTION 31
You are installing a 4-node AFF A400 cluster and are asked to create a custom security message before and after user login.
Which two security features are used to perform this task? (Choose two.)
- A. EMS
- B. motd
- C. AutoSupport
- D. banner
Answer: B,D
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-9BA57AF6-A0AB-4098-A1B3-8577DD0EC90B.html
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-9BA57AF6-A0AB-4098-A1B3-8577DD0EC90B.html
NEW QUESTION 32
You install a new 2-node FAS8200 switchless cluster. You want to reach all necessary management LIFs and SPs for this cluster.
How many management IP addresses do you need in this scenario?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 33
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node1:e4a and node2:e4b.
- B. Swap node2:e4a and node2:e8a.
- C. Swap node1:e8a and node2:e4a.
- D. Swap node1:e4a and node1:e8a.
Answer: B
NEW QUESTION 34
Which two configurations use root-data-data partitioning? (Choose two.)
- A. FAS8080 with 1.8 TB external SAS drives
- B. AFF A220 with 3.8 TB internal SSD drives
- C. AFF A800 with 3.8 TB internal NVMe SSD drives
- D. FAS2650 with 1.8 TB internal SAS drives
Answer: B,C
NEW QUESTION 35
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log. What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. BGP
- B. AutoSupport
- C. EMS
- D. SNMP
Answer: C
NEW QUESTION 36
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?
- A. fabricshow
- B. show running-config
- C. switchcfgshow
- D. config show
Answer: B
Explanation:
Verify on the switch that the RCF has been merged successfully: show running-config " https://docs.netapp.com/platstor/index.jsp?topic=%2Fcom.netapp.doc.hw-sw-92300yc-replace%2FGUID-B9273A46-2084-4FEA-8969-62C2D578643B.html
NEW QUESTION 37
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Remove the Ethernet cables.
- B. Disable out-of-band ACP.
- C. Move the SAS cables to a new stack.
- D. Enable in-band ACP.
Answer: B,C
NEW QUESTION 38
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 4
- B. Option 2
- C. Option 1
- D. Option 3
Answer: C
Explanation:
https://library.netapp.com/ecm/ecm_download_file/ECMM1280394
NEW QUESTION 39
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Interoperability Matrix Tool (IMT)
- B. Hardware Universe (HWU)
- C. Fusion
- D. Config Advisor
Answer: C
NEW QUESTION 40
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use a USB drive with the new software image and let ONTAP automatically boot.
- B. Use ONTAP System Manager to download and install the new software image.
- C. Use the cluster image package get and cluster image update commands.
- D. Use ONTAP System Manager to upload and install the new software image.
Answer: B,C
NEW QUESTION 41
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. master
- B. term-based
- C. perpetual
- D. base
Answer: B,C
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/17239-tr4598pdf.pdf (10)
NEW QUESTION 42
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. cluster management LIF
- B. node management LIF
- C. cluster LIF
- D. data LIF
Answer: B
NEW QUESTION 43
......
Network Appliance NS0-183 Dumps PDF Are going to be The Best Score: https://examtorrent.actualcollection.com/NS0-183-exam-questions.html