Get Mar-2023 Download Latest & Valid Questions For BICSI INSTC_V7 exam [Q66-Q85]

Share

Get Mar-2023 Download Latest & Valid Questions For BICSI INSTC_V7 exam

Ensure Success With Updated Verified INSTC_V7 Exam Dumps

NEW QUESTION 66
Unqualified workers must stay AT LEAST ____ from exposed energized conductors operating at 300 to
50,000 V.

  • A. 0.3 m (1')
  • B. 3 m (10')
  • C. 15 m (50")
  • D. 30 m (100')

Answer: B

 

NEW QUESTION 67
Which of the following is a floor serving space that serves as a point of termination for horizontal and backbone cables?

  • A. Work area
  • B. EF
  • C. TR
  • D. ER

Answer: C

 

NEW QUESTION 68
Which of the following tools is a low-cost cable verifier that can be used to test for opens, shorts, crossed pairs, and miswires in 4- pair cables?

  • A. Qualification tester
  • B. Telephone test set
  • C. TDR
  • D. Wire map tester

Answer: D

 

NEW QUESTION 69
What is the primary purpose of an electrical grounding system?

  • A. Ensure a minimal level of acceptable performance for a building's telecommunications infrastructure
  • B. Protect and provide organization for cables, splices and connectors
  • C. Enhance personnel safety and reduce the likelihood of a fire hazard
  • D. Prevent unauthorized access to the buildings electrical protection system

Answer: C

 

NEW QUESTION 70
Which of the following describes a nonmechanical firestop system that forms a hard char when exposed to flame?

  • A. Elastomeric
  • B. Ablative
  • C. Intumescent
  • D. Endothermic

Answer: B

 

NEW QUESTION 71
If you are working on a catwalk, you are required to wear _____?

  • A. Nothing, your fine on the catwalk
  • B. Safety belt
  • C. Full body harness and two lanyards

Answer: C

 

NEW QUESTION 72
Which of the following tend to cause sheath damage during cable pulling?

  • A. RMC/IMC
  • B. EMT/ENT
  • C. FMC/FMT

Answer: C

 

NEW QUESTION 73
What is the maximum allowable horizontal cable length?

  • A. 90 m (295')
  • B. 50 m (164')
  • C. 10 m (33 ')
  • D. 30 m (100')

Answer: A

 

NEW QUESTION 74
Which of the following components is used to bond the electrical system's grounding electrode system to the PBB?

  • A. RBB
  • B. BBC
  • C. TBC
  • D. TBB

Answer: C

 

NEW QUESTION 75
Which type of tester includes a set of modular plugs?

  • A. Cable-end locator kit
  • B. Multimeter
  • C. Tone generator
  • D. Inductive amplifier

Answer: A

 

NEW QUESTION 76
Which of the following is used to measure the length of a 4-pair cable?

  • A. Tone generator
  • B. Cable-end locator kit
  • C. Time domain reflectometer (TDR)
  • D. Pair scanner

Answer: C

 

NEW QUESTION 77
Which of the following may provide a demarcation point between the service provider and the customer premises cabling?

  • A. Telecommunications enclosure
  • B. Telecommunications room
  • C. Work area
  • D. Entrance facility

Answer: D

 

NEW QUESTION 78
Which of the following is a floor serving space that serves as a point of termination for horizontal and backbone cables?

  • A. TE
  • B. EF
  • C. TR
  • D. ER

Answer: C

 

NEW QUESTION 79
Which of the following must be measured before the length of a coaxial cable can be calculated?

  • A. Propagation delay
  • B. Insertion loss
  • C. DC loop resistance
  • D. Delay skew

Answer: C

 

NEW QUESTION 80
The information transmitted by an ICT system can originate in two fundamental forms:

  • A. Analog and digital
  • B. Light and sound
  • C. Synchronous and asynchronous
  • D. Progressive and regressive

Answer: A

 

NEW QUESTION 81
Which of the following steps should be performed first when an installer is pulling optical fiber cable?

  • A. Label cables
  • B. Attach pull rope
  • C. Install and secure innerduct
  • D. Ensure the cable has been tested and accepted

Answer: D

 

NEW QUESTION 82
Which of the following is used to establish a 0 volt (V) reference for ac electrical power systems?

  • A. Alternating current (AC) grounding electrode system
  • B. Telecommunication bonding infrastructure
  • C. Equipment grounding system

Answer: A

 

NEW QUESTION 83
Which of the following is used to equalize potential differences between the SBB on the same floor?

  • A. BBC
  • B. RBB
  • C. TEBC
  • D. TBB

Answer: A

 

NEW QUESTION 84
How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?

  • A. 12.7mm (0.5")
  • B. 6.3mm (0.25")
  • C. 38 mm (1.5")
  • D. 25mm (1")

Answer: A

 

NEW QUESTION 85
......

Exam Materials for You to Prepare & Pass INSTC_V7 Exam: https://examtorrent.actualcollection.com/INSTC_V7-exam-questions.html