[Dec 23, 2023] 5V0-42.21 PDF Dumps is essential on your 5V0-42.21 Exam Questions Certain Success!
5V0-42.21 PDF Questions - Perfect Prospect To Go With 5V0-42.21 Practice Exam
VMware 5V0-42.21 certification exam covers a wide range of topics related to SD-WAN design and deployment, including network design, security, deployment models, quality of service, and troubleshooting. 5V0-42.21 exam consists of 60 multiple-choice questions and has a time limit of 120 minutes. To pass the exam, candidates must achieve a minimum score of 300 out of 500.
VMware 5V0-42.21 exam is a vendor-neutral certification that is recognized by IT professionals around the world. VMware SD-WAN Design and Deploy Skills certification demonstrates that the candidate has the skills and knowledge necessary to design and deploy SD-WAN solutions using VMware technology. VMware SD-WAN Design and Deploy Skills certification is also an excellent way for IT professionals to demonstrate their expertise in this rapidly growing area of technology.
NEW QUESTION # 12
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
- B. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
- C. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- D. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
Answer: B
NEW QUESTION # 13
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 4 segments
- B. 2 segments
- C. 6 segments
- D. 5 segments
Answer: D
NEW QUESTION # 14
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?
- A. Define multiple segments tor each customer
- B. Enable tag type QinQ under hand off interface configuration
- C. Configure source policy-based NAT under business- policies configuration
- D. Enable NAT hand off under hand off static routes configuration
Answer: A
NEW QUESTION # 15
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account.
Which authentication protocol is supported?
- A. LDAP
- B. SAML 2.0
- C. OpenID Connect (OlDC)
- D. TACACS+
Answer: B
NEW QUESTION # 16
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN.
What is the main dependency that must be met for the feature to work?
- A. Gateway IPs must be routed in the overlay
- B. Default route learned via dynamic routing
- C. Internet reachability via the private WAN
- D. Static mute for gateway IPs on the edge
Answer: B
NEW QUESTION # 17
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?
- A. Any port may be chosen.
- B. GE4
- C. SFP1
- D. GE1
Answer: C
NEW QUESTION # 18
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. UDF 2426
- B. TCP 80
- C. TCP 443
- D. UDP 500
Answer: B
NEW QUESTION # 19
An administrator has been receiving complaints about their SaaS business collaboration apps.
Which network service should the administrator use to resolve the issue?
- A. CoS mapping
- B. Backhaul
- C. Multi-Path
- D. Direct
Answer: D
NEW QUESTION # 20
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. Standard HA
- B. Fault Domain HA
- C. VRRP HA
- D. Enhanced HA
Answer: C
NEW QUESTION # 21
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Business Policy
- B. VLANs
- C. Segments
- D. Firewall
Answer: C
Explanation:
https://kb.vmware.com/s/article/77153
NEW QUESTION # 22
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Deselect Error Correct before Steering Defaults.
- B. Select Error Correct Before Steering with % definition
- C. Select WAN Link, and then define the DSCP tagging
- D. Select Transport Group, and then select Preferred option.
Answer: C
NEW QUESTION # 23
The VMware SD-WAN solution is comprised of Orchestrator, Gateway, and Edge. The architecture ensures separation and secure communication between the management, control, and data plane of the solution.
The management plane consists of the VMware SD-WAN Orchestrator, and the control plane is comprised of the VMware SO-WAN Gateway/ Controller. Which statement correctly describes this situation?
- A. Traffic between VMware SD-WAN Edges and from VMware SD-WAN Edges to VMware SD-WAN Gateways uses VMware SD-WAN Management Protocol (VCMP) tunneling over User Datagram Protocol (UDP) port 2427. secured with Internet Protocol Security (IPSec)
- B. To make the entire solution to work property, TCP port 443 and HOP port 500 and UDP port 4500 are required to open in the firewall rule, if Edge is deployed behind a Firewall.
- C. VMware SD-WAN Edges/Gateways establishes a Transport Layer Security (TLS) 1 2 encrypted session to the VMware SU-WAN Orchestrator
- D. There is impact on data plane when the Edge loses connectivity to the management plane. The operator only loses the visibility of the Edge from Orchestrator and cannot make configuration changes on the Edge until the management plane connectivity is resumed.
Answer: A
NEW QUESTION # 24
An enterprise has deployed a VMware SD-WAN solution with Edges in many different located to different Partner Gateways.
Which design makes it possible to have dynamic branch to branch VPN tunnels between any two Edges?
- A. Add Controller role to each Partner Gateway.
- B. Dedicated at least one Gateway as a Controller, and few initial data plane packets will travers the Controller before dynamic tunnel is established between the two branches.
- C. Configure each partner Gateway as a Controller.
- D. Dedicate at least one Gateway as a Controller, and no data plan packets will traverse the Controller before dynamic tunnel is established between the two branches.
Answer: D
NEW QUESTION # 25
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate Requited
- B. Certificate Accepted
- C. Certificate Enabled
- D. Certificate Activated
- E. Certificate Disabled
- F. Certificate ate Optional
Answer: B,C,E
NEW QUESTION # 26
Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology.
Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B?
- A. Branch to Non VMware SU-WAN Site
- B. Branch to Branch VPN
- C. Site-to-Site VPN
- D. Branch to CASH
Answer: D
NEW QUESTION # 27
A technician at a customer site is deploying VMware SD-WAN Edge 620 notices that the Edge LED is shown amber.
What is the meaning of this LED color?
- A. Internet is not available from the Edge
- B. Edge is still booting.
- C. Edge is not activated.
- D. DNS is not reachable from the Edge.
Answer: A
NEW QUESTION # 28
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - D. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge.
Answer: A
NEW QUESTION # 29
What Is a typical use case for the deployment of a VMware SU-WAN Partner Gateway?
- A. Provide connectivity between multiple enterprise customers over private circuits
- B. Interconnect branches/remote sites of a single enterprise customer to the internet
- C. Provide mite transport m a service provider backbone tor interconnecting a global customer SD-WAN branches.
- D. Get improved flow analytics for all traffic in the SD-WAN network
Answer: C
NEW QUESTION # 30
Which characteristic of Software Defined Networks (SDN) is also true for VMware SD-WAN
- A. VMware SD-WAN provides separation of management control plane, and the data plane.
- B. VMware SD-WAN requires specialized hardware to run its software
- C. VMware SU-WAN allows customers to program the forwarding plane
- D. VMware SD -WAN provides distributed management and control plane
Answer: B
NEW QUESTION # 31
Employees with an Apple iOS device have been causing congestion on the company's internet What should an administrator configure to target these devices when creating a Business policy for this issue?
- A. Match Destination
- B. Action Network Service
- C. Action Priority
- D. Match Source
Answer: C
NEW QUESTION # 32
......
5V0-42.21 Exam with Accurate VMware SD-WAN Design and Deploy Skills PDF Questions: https://examtorrent.actualcollection.com/5V0-42.21-exam-questions.html