Free Netskope NSK300 Test Practice Test Questions Exam Dumps
Prepare Top Netskope NSK300 Exam Audio Study Guide Practice Questions Edition
NEW QUESTION # 30
You are currently designing a policy for AWS S3 bucket scans with a custom DLP profile Which policy action(s) are available for this policy?
- A. Alert, User Notification
- B. Alert, Quarantine. Block, User Notification
- C. Alert, Quarantine
- D. Alert only
Answer: C
Explanation:
When designing a policy for AWS S3 bucket scans with a custom DLP profile in Netskope, the available policy actions are Alert and Quarantine. These actions allow you to be notified when a policy violation occurs and to quarantine sensitive data to prevent potential data loss or exposure. The Alert action will notify the designated personnel or system when a match to the DLP profile is found during the scan. The Quarantine action will move the offending file to a secure location where it can be reviewed and dealt with appropriately1.
NEW QUESTION # 31
You have an NG-SWG customer that currently steers all Web traffic to Netskope using the Netskope Client. They have identified one new native application on Windows devices that is a certificate-pinned application. Users are not able to access the application due to certificate pinning. The customer wants to configure the Netskope Client so that the traffic from the application is steered to Netskope and the application works as expected.
Which two methods would satisfy the requirements? (Choose two.)
- A. Tunnel traffic to Netskope and bypass traffic inspection at the Netskope proxy.
- B. Bypass traffic using the bypass action in the Real-time Protection policy.
- C. Configure domain exceptions in the steering configuration for the domains used by the native application.
- D. Configure the SSL Do Not Decrypt policy to not decrypt traffic for domains used by the native application.
Answer: C,D
Explanation:
To address the issue of a certificate-pinned application not being accessible due to certificate pinning, while still steering the traffic to Netskope, the two methods that would satisfy the requirements are:
B: Configure the SSL Do Not Decrypt policy to not decrypt traffic for domains used by the native application. This ensures that the SSL traffic for the specified domains is not decrypted, thus avoiding issues with certificate pinning.
C: Configure domain exceptions in the steering configuration for the domains used by the native application. By setting domain exceptions, traffic to these domains will bypass SSL decryption, allowing the certificate-pinned application to function as expected1.
These methods are in line with Netskope's capabilities for handling certificate-pinned applications, which often require bypassing decryption to prevent breaking the application's functionality due to its security features1.
NEW QUESTION # 32
A recent report states that users are using non-sanctioned Cloud Storage platforms to share data Your CISO asks you for a list of aggregated users, applications, and instance IDs to increase security posture Which Netskope tool would be used to obtain this data?
- A. Cloud Confidence Index (CCI)
- B. Behavior Analytics
- C. Advanced Analytics
- D. Applications in Skope IT
Answer: C
Explanation:
To obtain a list of aggregated users, applications, and instance IDs, especially when dealing with non-sanctioned Cloud Storage platforms, the Advanced Analytics (A) tool within Netskope would be used. Advanced Analytics provides in-depth visibility into cloud app usage and activities. It allows security teams to create detailed reports and dashboards that can help identify risks and ensure compliance with company policies by analyzing user behavior, application access, and data movement across the organization1.
NEW QUESTION # 33
Review the exhibit.
A user has attempted to upload a file to Microsoft OneDrive that contains source code with Pll and PCI data.
Referring to the exhibit, which statement Is correct?
- A. The user will be blocked and a single Incident will be generated referencing the DLP-PCI profile.
- B. The user will be blocked and a separate incident will be generated for each of the matching DLP profiles.
- C. The user will be blocked and a single Incident will be generated referencing all of the matching DLP profiles
- D. The user will be alerted and a single incident will be generated referencing the DLP-PII profile.
Answer: B
Explanation:
In the given scenario, a user is attempting to upload a file containing sensitive PII and PCI data to Microsoft OneDrive. The Netskope Security Cloud provides real-time data and threat protection when accessing cloud services, websites, and private apps from anywhere, on any device. Based on the exhibit provided, different DLP (Data Loss Prevention) profiles are triggered - DLP-SourceCode, DLP-PCI, and DLP-PII. Each of these profiles has specific actions associated with them; for instance, an alert is generated for Source Code while blocking actions are initiated for PCI and PII data. Since multiple DLP profiles are triggered due to the sensitive nature of the content in the file being uploaded, separate incidents will be generated for each matching profile ensuring comprehensive security coverage and incident reporting.
Reference:
Netskope Cloud Security
Netskope Resources
Netskope Documentation
NEW QUESTION # 34
You want to enable the Netskope Client to automatically determine whether it is on-premises or off-premises. Which two options in the Netskope Ul would you use to accomplish this task? (Choose two.)
- A. the On Premises Detection option under the Client Configuration section of the Ul
- B. the New Exception option in the Traffic Steering options of the Ul
- C. the All Traffic option in the Steering Configuration section of the Ul
- D. the Enable Dynamic Steering option in the Steering Configuration section of the Ul
Answer: A,D
Explanation:
To enable the Netskope Client to automatically determine whether it is on-premises or off-premises, you can use the following options in the Netskope UI:
Enable Dynamic Steering:
This option is available in the Steering Configuration section of the UI.
By enabling dynamic steering, the Netskope Client can intelligently determine the appropriate data plane (on-premises or cloud) based on the user's location and network conditions.
It ensures that traffic is directed to the optimal data plane for improved performance and security.
Reference:
On Premises Detection:
This option is available under the Client Configuration section of the UI.
By configuring on-premises detection, the Netskope Client can identify whether it is connected to the local network (on-premises) or accessing resources from outside (off-premises).
It helps in applying relevant policies and steering traffic accordingly.
NEW QUESTION # 35
You are implementing a solution to deploy Netskope for machine traffic in an AWS account across multiple VPCs. You want to deploy the least amount of tunnels while providing connectivity for all VPCs.
How would you accomplish this task?
- A. Use GRE tunnels from the AWS Transit Gateway.
- B. Use IPsec tunnels from the AWS Transit Gateway.
- C. Use GRE tunnels from the AWS Virtual Private Gateway
- D. Use IPsec tunnels from the AWS Virtual Private Gateway.
Answer: B
Explanation:
The best approach to deploy Netskope for machine traffic across multiple VPCs in an AWS account with the least amount of tunnels while providing connectivity for all VPCs is to use IPsec tunnels from the AWS Transit Gateway. This method allows you to use the same Site-to-Site VPN connection to Netskope for multiple VPCs, thus minimizing the number of tunnels required12. The AWS Transit Gateway acts as a network transit hub, enabling you to connect your VPCs and on-premises networks through a central point of management and control. Using IPsec tunnels with the AWS Transit Gateway ensures that all VPCs connected to it utilize the same IPsec tunnel between the transit gateway and Netskope POP1.
NEW QUESTION # 36
You are consuming Audit Reports as part of a Salesforce API integration. Someone has made a change to a Salesforce account record field that should not have been made and you are asked to venfy the previous value of the structured data field. You have the approximate date and time of the change, user information, and the new field value.
How would you accomplish this task?
- A. Query Skope IT for an Access Method of API Connector and search Application Event Details for the Old Value field using the User details and Edit Activity.
- B. Use the Application Events Data Collection within Advanced Analytics and filter on the changed field value.
- C. Create a classic report and apply a query that filters on the changed field value.
- D. Query Skope IT Page Events and look for the specific Page URL that was called under the Application section.
Answer: A
Explanation:
To verify the previous value of a structured data field in Salesforce after an unauthorized change, you would use Skope IT with an Access Method of API Connector. This method allows you to search the Application Event Details for the 'Old Value' field. By filtering with the user details and the edit activity, you can pinpoint the exact change and retrieve the original value of the field.
NEW QUESTION # 37
You want customers to configure Real-time Protection policies. In which order should the policies be placed in this scenario?
- A. Threat, CASB, RBI, Web
- B. Threat, RBI, CASB, Web
- C. RBI, CASB, Web, Threat
- D. CASB, RBI, Threat, Web
Answer: C
Explanation:
When configuring Real-time Protection policies in Netskope, the recommended order is as follows:
RBI (Risk-Based Index) Policies: These policies focus on risk assessment and prioritize actions based on risk scores. They help identify high-risk activities and users.
CASB (Cloud Access Security Broker) Policies: These policies address cloud-specific security requirements, such as controlling access to cloud applications, enforcing data loss prevention (DLP) rules, and managing shadow IT.
Web Policies: These policies deal with web traffic, including URL filtering, web categories, and threat prevention.
Threat Policies: These policies focus on detecting and preventing threats, such as malware, phishing, and malicious URLs.
Placing the policies in this order ensures that risk assessment and cloud-specific controls are applied before addressing web and threat-related issues. Reference:
Netskope Security Cloud Introductory Online Technical Training
Netskope Security Cloud Operation & Administration (NSCO&A) - Classroom Training Netskope Certification Description Netskope Architectural Advantage Features
NEW QUESTION # 38
You created a Real-time Protection policy that blocks all activities to non-corporate S3 buckets, but determine that the policy is too restrictive. Specifically, users are complaining that normal websites have stopped rendering properly.
How would you solve this problem?
- A. Create a Real-time Protection policy to allow the Download activity to the Amazon S3 application
- B. Create a Real-time Protection policy to allow the Browse activity to the Cloud Storage category
- C. Create a Real-time Protection policy to allow the Download activity to the Cloud Storage category
- D. Create a Real-time Protection policy to allow the Browse activity to the Amazon S3 application.
Answer: B
Explanation:
To solve the problem of normal websites not rendering properly due to a Real-time Protection policy that blocks all activities to non-corporate S3 buckets, the best solution is to create a Real-time Protection policy to allow the Browse activity to the Cloud Storage category. This approach will enable users to view content from various cloud storage services, including Amazon S3, without allowing full access to non-corporate S3 buckets. It's a more granular and less restrictive policy that allows necessary browsing activities while still maintaining control over the upload and download activities to non-corporate buckets1.
NEW QUESTION # 39
A company needs to block access to their instance of Microsoft 365 from unmanaged devices. They have configured Reverse Proxy and have also created a policy that blocks login activity for the AD group "marketing-users" for the Reverse Proxy access method. During UAT testing, they notice that access from unmanaged devices to Microsoft 365 is not blocked for marketing users.
What is causing this issue?
- A. There is a missing group name in the SAML response.
- B. The username in the name ID field is not in the format of the e-mail address.
- C. The username in the name ID field does not have the "marketing-users" group name.
- D. There is an invalid certificate in the SAML response.
Answer: A
Explanation:
The issue is likely caused by a missing group name in the SAML response (A). When access to Microsoft 365 from unmanaged devices is not blocked as expected, despite having a policy in place, it often indicates that the SAML assertion is not correctly identifying the user as a member of the restricted group. In this case, the "marketing-users" group name should be present in the SAML response to enforce the policy that blocks login activity for this group. If the group name is missing, the policy will not apply, and users will not be blocked as intended.
NEW QUESTION # 40
You are troubleshooting an issue with users who are unable to reach a financial SaaS application when their traffic passes through Netskope. You determine that this is because of IP restrictions in place with the SaaS vendor. You are unable to add Netskope's IP ranges at this time, but need to allow the traffic.
How would you allow this traffic?
- A. Use Explicit Proxy Over Tunnel (EPoT) so the traffic will egress from the corporate data center.
- B. Use an IPsec tunnel to forward traffic so it will egress from the corporate data center
- C. Use NPAto implement Source IP anchonng so the traffic will egress from the corporate data center.
- D. Use Cloud Explicit Proxy so the traffic will egress from the corporate data center
Answer: D
Explanation:
To allow traffic to a financial SaaS application that is being blocked due to IP restrictions, the best option is to use Cloud Explicit Proxy. This method allows traffic to egress from the corporate data center without requiring Netskope's IP ranges to be added to the SaaS vendor's allowlist. By configuring an allowlist in the Cloud Explicit Proxy settings, you can add any source egress IP addresses for your on-premises users, and Netskope will allow the traffic from the added user and IP address without authenticating1.
NEW QUESTION # 41
You are using Netskope CSPM for security and compliance audits across your multi-cloud environments. To decrease the load on the security operations team, you are researching how to auto-re mediate some of the security violations found in low-risk environments.
Which statement is correct in this scenario?
- A. You can use Netskope API-enabled Protection for auto-remediation of security violation results.
- B. Netskope does not support automatic remediation of security violation results due to the high risk associated with it.
- C. You can use Netskope Auto-remediation frameworks from the public Netskope GitHub Open Source repository for auto-re mediation of security violation results.
- D. You can use Netskope Cloud Exchange for auto-remediation of security violation results.
Answer: C
Explanation:
Netskope supports automatic remediation of security violations through its Auto-Remediation frameworks, which are available in the public Netskope GitHub Open Source repository. These frameworks allow for the automatic mitigation of risks associated with security misconfigurations in your cloud environment. The Netskope Auto-Remediation framework for AWS, for example, deploys a set of AWS Lambda functions that query the Netskope API at scheduled intervals and automatically mitigates supported violations1. Similarly, there are frameworks for GCP and other cloud environments that follow the same principle2. This capability is particularly useful for low-risk environments where the security operations team's workload can be reduced by automating the remediation process.
NEW QUESTION # 42
Your customer is currently using Directory Importer with Active Directory (AD) to provision users to Nelskope. They have recently acquired three new companies (A. B. and C) and want to onboard users from the companies onto the NetsKope platform. Information about the companies is shown below.
- Company A uses Active Directory.
-- Company B uses Azure AD.
-- Company C uses Okta Universal Directory.
Which statement is correct in this scenario?
- A. Users from Companies A. B, and C can be provisioned to Netskope by deploying additional AD Importers and integrating more than one SCIM solution.
- B. Company A users cannot be provisioned to Netskope because the customer is already using AD Importer to import users from another Active Directory environment.
- C. Users from Company B and Company C cannot be provisioned because the customer is already using AD Importer.
- D. Either Company B or Company C users cannot be provisioned because integration with only one SCIM solution is allowed.
Answer: A
Explanation:
Users from Companies A, B, and C can indeed be provisioned to Netskope. Company A, which uses Active Directory, can continue to use the existing AD Importer. For Company B that uses Azure AD and Company C that uses Okta Universal Directory, integration with SCIM (System for Cross-domain Identity Management) solutions is possible. Netskope supports provisioning users from multiple directories, including Active Directory and cloud-based identity providers like Azure AD and Okta, by using additional AD Importers and integrating more than one SCIM solution12.
NEW QUESTION # 43
You deployed the Netskope Client for Web steering in a large enterprise with dynamic steering. The steering configuration includes a bypass rule for an application that is IP restricted. What is the source IP for traffic to this application when the user is on-premises at the enterprise?
- A. Loopback IPv4
- B. DHCP assigned RFC1918 IPv4
- C. Netskope data plane gateway IPv4
- D. Enterprise Egress IPv4
Answer: D
Explanation:
When a user is on-premises at the enterprise and accesses an application that is IP restricted, the source IP for traffic to this application is the Enterprise Egress IPv4 address.
The Enterprise Egress IP represents the external IP address of the enterprise network as seen by external services or applications.
This IP address is used for communication between the user's device and external resources, including applications that are IP restricted. Reference:
The answer is based on general knowledge of networking concepts and how IP addresses are used in enterprise environments.
NEW QUESTION # 44
You have users connecting to Netskope from around the world You need a way for your NOC to quickly view the status of the tunnels and easily visualize where the tunnels are located Which Netskope monitoring tool would you use in this scenario?
- A. Alerts in Skope IT
- B. Network Steering in Digital Experience Management
- C. Network Events in Skope IT
- D. Web Usage Summary in Advanced Analytics
Answer: B
Explanation:
Network Steering in Digital Experience Management is the appropriate Netskope monitoring tool for this scenario. It allows the Network Operations Center (NOC) to quickly view the status of the tunnels and provides an easy way to visualize the locations of the tunnels. This tool is designed to give a clear overview of network health and performance, which is essential for managing global connectivity and ensuring the reliability of the service.
NEW QUESTION # 45
Users in your network are attempting to reach a website that has a self-signed certificate using a GRE tunnel to Netskope. They are currently being blocked by Netskope with an SSL error. How would you allow this traffic?
- A. Ensure that the users add the self-signed certificate to their local certificate store.
- B. Configure a Do Not Decrypt SSL Decryption rule to allow traffic to pass.
- C. Set the No SNI setting in Netskope to Bypass.
- D. Configure a Real-time Protection policy with the action set to Allow.
Answer: B
Explanation:
To allow traffic from a website with a self-signed certificate that is being blocked by Netskope with an SSL error, the correct action is to configure a Do Not Decrypt SSL Decryption rule. This rule will allow the traffic to pass without being decrypted, thus bypassing the SSL error caused by the self-signed certificate. This is a common practice for handling traffic from trusted internal applications or specific external sites that use self-signed certificates1.
NEW QUESTION # 46
You are deploying the Netskope Client to Windows devices. The following command line would be used to install the client MSI file:
In this scenario, what is <token> referring to in the command line?
- A. the URL of the IdP used to authenticate the users
- B. a private token given to you by the SCCM administrator
- C. a Netskope user identifier
- D. the Netskope organization ID
Answer: D
Explanation:
In the context of deploying the Netskope Client to Windows devices, <token> in the command line refers to the Netskope organization ID. This is a unique identifier associated with your organization's account within the Netskope security cloud. It is used during the installation process to ensure that client devices are registered and managed under the correct organizational account, enabling appropriate security policies and configurations to be applied. Reference: The answer can be inferred from general knowledge about installing software clients and isn't directly available on Netskope's official resources.
NEW QUESTION # 47
You do not want a scheduled Advanced Analytics dashboard to be automatically updated when Netskope makes improvements to that dashboard. In this scenario, what would you do to retain the original dashboard?
- A. Create a new dashboard from scratch that mimics the Netskope dashboard you want to use.
- B. Ask Netskope Support to provide the dashboard and import into your Personal folder.
- C. Copy the dashboard into your Group or Personal folders and schedule from these folders.
- D. Download the dashboard you want and Import from File into your Group or Personal folder.
Answer: D
Explanation:
To retain the original dashboard without automatic updates due to improvements made by Netskope, you can download the desired dashboard and then import it from a file into your Group or Personal folder.
This approach ensures that you have a static version of the dashboard that won't be affected by future changes or enhancements. Reference:
The answer is based on general knowledge of dashboard management and customization within Netskope.
NEW QUESTION # 48
Your Netskope Client tunnel has connected to Netskope; however, the user is not receiving any steering or client configuration updates What would cause this issue?
- A. The Netskope Client service is not running.
- B. The client is unable to establish communication to add-on-[tenantl.goskope.com.
- C. An invalid steering exception was created in the tenant
- D. The client is unable to establish communication to gateway-(tenant|.goskope.com.
Answer: A
Explanation:
When the Netskope Client service is not running, it cannot execute the necessary processes to receive steering or client configuration updates. The service must be active to establish communication with the Netskope cloud and apply the configurations and policies defined by the administrator.
NEW QUESTION # 49
You have multiple networking clients running on an endpoint and client connectivity is a concern. You are configuring co-existence with a VPN solution in this scenario, what is recommended to prevent potential routing issues?
- A. Modify the VPN to operate in full tunnel mode at Layer 3. so that the Netskope agent will always see the traffic first.
- B. Configure a Network Location with the VPN IP ranges and add it as a Steering Configuration exception.
- C. Configure the VPN to full tunnel traffic and add an SSL Do Not Decrypt policy to the VPN configuration for all Netskope traffic.
- D. Configure the VPN to split tunnel traffic by adding the Netskope IP and Google DNS ranges and set to Exclude in the VPN configuration.
Answer: A
Explanation:
To prevent potential routing issues and ensure that the Netskope agent consistently sees the traffic first, it is recommended to modify the VPN to operate in full tunnel mode at Layer 3.
In full tunnel mode, all traffic from the endpoint is routed through the VPN, including traffic destined for Netskope. This ensures that the Netskope agent can inspect and apply policies to all traffic, regardless of the destination.
Layer 3 full tunnel mode provides better visibility and control over the traffic flow, reducing the risk of routing conflicts or bypassing the Netskope inspection. Reference:
The answer is based on general knowledge of VPN configurations and their impact on traffic routing.
NEW QUESTION # 50
You are attempting to merge two Advanced Analytics reports with DLP incidents: Report A with 3000 rows and Report B with 6000 rows. Once merged, you notice that the merged report is missing a significant number of rows.
What is causing this behavior?
- A. Filters are applied differently to dimensions and measures
- B. Visualizations have a system limit of 5000 rows.
- C. Missing data is due to viewing limits.
- D. Netskope automatically deduplicates data in merged reports.
Answer: C
Explanation:
When merging two Advanced Analytics reports in Netskope, if the merged report is missing rows, it is likely due to viewing limits within the system. Netskope's Advanced Analytics platform has limitations on the number of rows that can be viewed at once, which can result in missing data when dealing with large reports. This viewing limit ensures performance and manageability of the data within the system.
NEW QUESTION # 51
Your CISO asks that you to provide a report with a visual representation of the top 10 applications (by number of objects) and their risk score. As the administrator, you decide to use a Sankey visualization in Advanced Analytics to represent the data in an efficient manner.
In this scenario, which two field types are required to produce a Sankey Tile in your report? {Choose two.)
- A. Measure
- B. Pivot Ranks
- C. Dimension
- D. Period of Type
Answer: A,C
Explanation:
To produce a Sankey Tile in a report that visually represents the top 10 applications by number of objects and their risk score, you would need:
Dimension (A): This field type would be used to represent the nodes in the Sankey visualization, which could be the applications in this case1.
Measure (B): This field type would provide the weight of the links between the nodes, representing the number of objects or the risk score associated with each application1.
These two field types are essential for creating a Sankey visualization as they define the structure and flow of data between different stages or categories within the visualization.
NEW QUESTION # 52
You are architecting a Netskope steering configuration for devices that are not owned by the organization The users could be either on-premises or off-premises and the architecture requires that traffic destined to the company's instance of Microsoft 365 be steered to Netskope for inspection.
How would you achieve this scenario from a steering perspective?
- A. Use explicit proxy and the Netskope Client
- B. Use IPsec and GRE tunnels.
- C. Use DPoP and Secure Forwarder
- D. Use reverse proxy.
Answer: A
Explanation:
For devices not owned by the organization, using an explicit proxy along with the Netskope Client is the best approach to steer traffic for inspection. This method allows for granular control over the traffic, ensuring that only the traffic destined for the company's instance of Microsoft 365 is inspected by Netskope. The explicit proxy configuration can be applied regardless of whether the users are on-premises or off-premises, providing a consistent steering mechanism for all users.
NEW QUESTION # 53
......
Go to NSK300 Questions - Try NSK300 dumps pdf: https://examtorrent.actualcollection.com/NSK300-exam-questions.html